Laurell Screeder / Spin Coater (Laurell)

Product Description

Laurell Technology Advantage
Selection of the best spin-coating solutions for you
All Laurell Technologies 650 Series Spin Coat Processors come standard with the following core benefits:
(All Laurell Technologies 650 series spin processors come with the following benefits)
Hardware Features
Easy Programming: Quick setup without a manual, supports many advanced features.
(Easy to program without a manual with many advanced capabilities)
Time control: 1 second to 99 minutes 59.9 seconds range, adjustable in 0.1 second steps.
(Time: 1 second to 99 minutes 59.9 seconds in 0.1 second increments)
Program storage: 20 groups of 51 steps of preset programs (supports manual mode), user-definable step/program number through SPIN 3000 software.
(*Programs: twenty 51-step programs or manual mode — number of steps/programs can be user reconfigured through SPIN 3000*)
Software & Connectivity
SPIN 3000: comes standard with mature PC-based control software (not required, system can be programmed independently).
(*SPIN 3000 field-proven advanced PC interface software included, not required to program system*)
Bluetooth communication: Class 1 standard (100m/328ft wireless range), no cable conversion required.
(*Class 1 Bluetooth® (100 meter / 328 ft range) — offered as standard (no cable or converter)*)
structural design
Anti-drip top cover: fluid-guided rear drain, no risk of dripping when opening the cover.
(Fluid-control lid directs materials towards rear drain — no drips encountered when opening chamber)
Top cover made of transparent ECTFE: 19 mm (3/4 inch) diameter center opening.
(*Clear ECTFE lid with Ø3/4” (Ø19 mm) center opening*)
Transparent ECTFE top cover
Center opening: Ø3/4 inch (Ø19 mm) diameter
(*Clear ECTFE lid with Ø3/4” (Ø19 mm) center opening*)
Drainage and nitrogen purge
NPP drain port: Ø1.5 inch (Ø38 mm) diameter, supports nitrogen purge
(Ø1.5” (Ø38 mm) NPP Drain Port and Nitrogen purge)
3. Safety interlock systems
Door interlock: no rotation when the hatch is open
(Safety door interlock (disallows rotation when door is open))
Latch design: manual operation is required to open the process chamber
(Safety door latch (requires deliberate action to open process chamber))
Operation lockout: the hatch cannot be opened while the program is executing or when the rotary table is not stopped
(Safety door lock (prevents chamber opening while program is running, or during chuck rotation after program ends))
Vacuum interlock: prohibits startup when vacuum is insufficient
(Vacuum interlock (disallows rotation when there is insufficient vacuum))
4. Corrosion-resistant design
Fully sealed construction: no metal exposure, resistant to strong acids/alkalis
(Corrosion-proof configuration (no exposed metal — therefore, no degradation using strong acids or bases))
5. Glove box compatible configurations
Continuous hermetic purge: compressed dry air (CDA) or inert gas connection required.
(Glovebox-ready configuration (Continuous seal purge with CDA or inert gas required))
6. Lifetime process support
(Lifetime Process Support)