+86 13917986725
Niren NTV-P3 Series Rotational Viscometer
Product Description
Model:
NTV-P3L, measuring range 1-6 M (mPa.s)
NTV-P3R, measuring range 100-40 M (mPa.s)
NTV-P3HA, measuring range 200-80 M (mPa.s)
NTV-P3HB, measuring range 800-320 M (mPa.s)
(M: millions)
1. 7-inch wide touch screen, easy to operate, displaying rich information
2.Optional DV data acquisition and program control software can measure the rheological characteristics, and the screen can directly display the rheological curve.
3.Display of shear rate and shear stress indicators
4. Anti-static housing, metal lifting bar design
5. Built-in RTD temperature probe
6: ARM chip processor, faster processing data speed
7. Durable new small shaft design
8: Powerful human-computer interface
9. Gigabit network port data communication transmission, fast and reliable data transmission.
10. Support external U disk data storage; single-point, continuous, timed three kinds of saving methods optional.
11. Password-protected temperature and viscosity correction factors allow the user to correct the temperature and viscosity correction factors themselves, provided that reliable and accurate data are available.
12. Supportinfinitely variable speedTo measure viscosity, enter any RPM and it will directly reflect the full scale under each rotor, making it easy for the user to select test conditions.
13. Automatic conversion of kinetic viscosity to kinematic viscosity
14. Arbitrary interchangeability of multiple viscosity units
15. Interchangeable interfaces with a variety of user-friendly operating styles
16. Comes with a powerful wizard to help you.
17. Viscosity values show continuous change
18. Alarm sounds when the measuring range is exceeded
19. Computerized full-scale linear correction
20. AC power adapter 100V-240V, good interference immunity
Product Specification
Rotor speed: 0.1-250 rpm, stepless speed variation
Measurement accuracy: ±1.0% (full scale)
Repeatability: 0.5%
Rotor Configuration:
P3L with 4 rotors (No. 1, 2, 3, 4) (No. 0 rotor is optional)
P3R, P3HA, P3HB with 6 rotors (No. 2, 3, 4, 5, 6, 7) (No. 0, 1 rotor is optional)
LV 0 Ultra Low Viscosity Adapter
1. Attach the fixing bracket (with one of the fixing screws on the fixing bracket facing you) to the connection under the protective cover of the viscometer (turn it in to the right to attach it, and turn it out to the left to remove it).
2. Insert rotor 0 through the mounting bracket and screw the connector on rotor 0 into the connecting screw on the viscometer; (screw in left to install, screw out right to remove).
3. Fill the measuring cylinder with an appropriate amount (about 30 ml) of the measured liquid and then load it from the bottom of the fixed bracket up to the bottom position, and then fix it on the bracket with three screws, and carefully observe that the surface of the measured liquid is just above the surface of the zero rotor cone;
4. Set the rotor number and rotor speed on the viscometer according to the "Viscometer Instruction Manual" (it is recommended that the rotor speed should not be less than 30 rpm). The viscosity of the measured liquid can be measured.
Product Features
NTV-P3L, reference market price: 27460
NTV-P3R, reference market price: 31880
NTV-P3HA, Reference Market Price: 31880
NTV-P3HB, reference market price: 31880