+86 13917986725
Digital Stroboscope (SHIMPO, Japan)
Product Description
Model: DT-311N/DT-315N/DT-313/DT-311J
Shimpo digital stroboscope can send out a short and dense flash, when adjusting its flash rate and the speed of the object under test or vibration rate synchronization, visually feel the movement of the object presents a stationary state, the flash rate at this time that is the speed of the object under test, but also can be used to analyze the vibration of the object with a digital stroboscope, high-speed movement of the object and high-speed photography and other analysis of the movement of the object.
Shimpo's DT-311N and DT-315N digital stroboscopes utilize the latest microprocessor technology for visual inspection.
-Aluminum construction for durability
-Highly polished and focused reflector eliminates "blind spots" in the detection area
-External triggers automatically synchronize the tool with the device.
-Continuous load cycling without having to shut down the unit to keep it cool
-Phase shift allows visual analysis of rotating/reciprocating target objects
-High accuracy (reading error ±0.01%) facilitates QC inspection and process control
-Synchronized outputs allow one stroboscope to drive other stroboscopes
-Use of strobe timer control can extend flash tube life
Product Specification
DT-311N Stroboscope
-Compact and lightweight.
-Still bright enough at low speeds
-Strobe range: 40.0 - 35,000 RPM
-Accuracy: ±0.01% of reading
DT-315N Digital Stroboscope
The basic specification is the same as DT-311N, and the strobe range is also 40.0-35,000RPM, butBuilt-in rechargeable batteryIt can be taken anywhere and used anywhere.
Operating time: about 1 hour
Charging time: about 2 hours
-With analog output interface
-Built-in phase adjustment function
DT-311N and DT-315N stroboscopes can be operated by hand or mounted on a tripod for easier operation.
DT-311J Digital Stroboscope
Stroboscopic range from 200 to 1500 rpm, mainly used for loom timing system adjustment and control. The strobe is fired synchronously using external and internal signals, and the external signal is processed through an adjustable switch, which is shifted in the range of 0 to 359 degrees at the position of the forward tangent of the external signal. The strobe can be emitted with a continuous delay and the delay angle is indicated in the indicator. The zero position can be set at any selectable synchronized position Rotation speed can be achieved with on-screen display.
Product Features
No content